Refining Major Surfaces

In these photos you can see that I have blocked in and smoothed the major surfaces from which I will reference all others from. The primary surface is the one that rises directly from the waterline (the darker surface), with the secondary being the vertical surface that creates the gunwhale line between it and the top horizontal surface.


A view of the bow showing the difference in material from the reference surfaces on the left and the untouched layers on the right...


A couple of details shots showing the area on top of the canopy. The curved section (in front of the scale figure) will become the bridge, which will connect directly to the helicopter landing pad, where the figure is standing. The material to the left of the centreline has been left in place to allow further development.